[bitfolk] Manually added dedicated IP after initial install,…

Top Page

Reply to this message
Author: Daniel Bendorf
Date:  
To: users
Subject: [bitfolk] Manually added dedicated IP after initial install, no ping/network access
Howdy!

I have two VPS on bitfolk. The first one I didn't know I needed a
dedicated IP address, so had to order it and patched it in by editing
/etc/netplan/*.yaml as shown on
https://tools.bitfolk.com/wiki/Ubuntu#The_switch_to_netplan_for_configuring_networking

I added the - "x.x.x.x/32" (dedicated ip) underneath the - "x.x.x.x./21"
(VPS default IP) and did not use the "tab" ley because yaml didn't like
that.

I did a xen console shutdown and boot. The IP address shows up when
logging in the MOTD and in "ip a" successfully.

However, the dedicated IP address will not ping from outside, but the
default will. I have disabled ufw and still no network access.

On the second VPS, it was setup with dedicated IP address initially. So
both IPs are usable, ping from internet traffic and can be used. The
/etc/netplan/*.yaml on both installs is setup absolutely similar, showing
that my "patching" was correct usage.

Any help would be appreciated! I have never added an interface to a live
setup.

Timmy